|
Flout Technical Area
This area is a clearing house of all information necessary
to properly design, manufacture chambers for , and install FLOUT® apparatus and associated systems.
DOWNLOADS: Flout application drawings in .pdf.
Typical Flout - Single 3" outlet
Typical Flout - Double 3" outlet
Typical Flout - Triple 3" outlet
Typical Flout - Quad 3" outlet
Typical Alternating Flout - Pair of single 3" outlets
Flout body- One 3" outlet
Flout Body- Two 3" outlets
Flout body- Three 3" outlets
Flout body- Four 3" outlets
|
|
This is a graph shows flow rates for
single outlet 3" and 4" Flouts. The chart shows maximum and average flows for a 3" Flout. The flows are the
maximum at turn-on measured at the vent. For reference, the upper curve of each pair shows flow thru a simple orifice. Lower
curve shows flow through the Flout. The average flow from any Flout is approximately the maximum flow of one with 1/2
of the original drawdown. Multiply flow by number of outlets for multiple outlet Flouts.
|
| |
|
DOWNLOAD Flout Installation Instruction PDF
|
