Rissy Plastics, LLC

Weep Hole Formers

WHP-010 This is the first product offered by Rissy. It is used vertically. See where! Front dimension is 5/8 in. x 4 in. Base is 2 in. x 6 1/2  in. The height is 2 3/4 in. Molded in mounting bolts are 5/16-18. There are two, 2 7/8 inch on center. The bolts are  1 1/8 in. long	DOWNLOAD above PDF
WHP020 This is the standard offset plug for leaching galleries. They are usually used horizotally. The offset  makes for use low in the form close to the hinge point, where binding may occur during stripping. They may be used anywhere on the form. Front dimension is 1 1/2 in. x 5 in. Base is 3 7/8 in. x 6  in. The height is 2 7/8 in. Molded in mounting bolts are 1/4-20bolts. There are two, 5 1/8 inch on center. Bolts are 1 in. long	DOWNLOAD above in PDF
WHP021 This is the standard "even" plug for leaching galleries. They are usually used horizontally. They are used higher up in the form, away from the hing binding point. Front dimension is 2 in. x 4 7/8 in. Base is 3 1/2 in. x 6  in. The height is 2 7/8 in. Molded in mounting bolts are 1/4-20. There are two, 5 1/8 inch on center. The bolts are  1 in. long	DOWNLOAD above in PDF

Back to Precaster Products

Home Page